Take U no time at all. drain tank first if U have a 5 dollar squeeze pump,dont have 1 go buy one.
2 bolts get seat off.
Then 2 bolts at front,lift tank and prop with rod under the hump.
Take of fuel line from tank bottom.
Remove pump assembly.
remove hinge plate at bottom.
Shake tank to get remaing fuel out.
Remove fuel lid,only 4 bolts,not all 8. 4 are used to hold lid to tank, you'll see which 4 with fuel lid open. they are left and right of the top bolt,and left and right of the word suzuki.
VERY IMPORTANT...tell painter to tape all openings. Paint inside the tank...BAD. A good painter will know this,but anyone can fug up.
RSD.