front end lowering kits??

[busaonboost]

Does anyone make a internal lowering kit? post pix if you have it done.

[Commuta_Busa]

I'm not sure what you mean but if you mean cut forks then most probably don't go that route unless they're setup strictly for drag racing.

[busaonboost]

yea even if you cut the forks you still need a spacer in the cartridge and cut the spring spacer in the main body. I just need the spacers for the cartridge

[busaonboost]

i have done it to mine and i want to see if there was an actual kit out there so i can start doing these

[Commuta_Busa]

oh man... I haven't thought about those spacers in such a long time. It might have been pingel that had them. Check with some of the guys like mps, fbg, ape, etc. Sorry I don't have more info for ya

[busaonboost]

thanks i found them through good old schnitz. But when i did mine all i used was 1/8in aluminum tubing and it work perfect. i think ill just make my own. lol

[Commuta_Busa]

yea I was thinking the same thing. If you're gonna put a kit together you're better off just making them from bar stock or something similer.

thanks i found them through good old schnitz. But when i did mine all i used was 1/8in aluminum tubing and it work perfect. i think ill just make my own. lol