Front brake calipers upgrade
- Thread starter Raul_923
- Start date
Berlin Germany
Registered
@Raul_923
if u think ur front brake is not "hard / snappy / beastly (aggressive)" enough
put the calipers off and make a deep clean
as i described here at my homepage at gen1´s
it may help
__________________________________________________________________
or u change to the brembos (golden) from the abs versions (since ´13)
the early gen2 (´08-´12) (deep grey) tokico - calipers seem to cause issues - sometimes - i guess
and sorry - no idea why that
if u think ur front brake is not "hard / snappy / beastly (aggressive)" enough
put the calipers off and make a deep clean
as i described here at my homepage at gen1´s
it may help
__________________________________________________________________
or u change to the brembos (golden) from the abs versions (since ´13)
the early gen2 (´08-´12) (deep grey) tokico - calipers seem to cause issues - sometimes - i guess
and sorry - no idea why that
michael parris heuberger
Registered
michael parris heuberger
Registered
Hi. Steelbreaded brake lines and a Brembo RSC 19 master then upgrade the calipers. I do not like ABS brakes. (I drive a Lola T 142 in F 5000 rraces) I use Barenger brakes on my street/ LSR bike I am building but they were around $3,200.00 for the front and about $800.00 for the rear.
Raul_923
Registered
Beringer is what I plan to use but in the future when I change my wheels for carbon fiber What I was reading that there are people who have changed to the r1 calipers and they have improved a lot
mabupa
Donating Member
Some people have posted about it somewhere on the forum. I personally went with the gsxr monoblocks and then switched to brembo just because they looked nicer. No modifications. If they are 108mm.
Raul_923
Registered
That I have seen in google but nothing in particular thought I could find more information here
mabupa
Donating Member
See pics and info on post #17 of the thread below:
Front Brake Upgrade on Gen II, Advice? | Gen 2 Busa Information
What is everyone doing on their GenII Busa's to improve the braking performance substantially? I have a 2009 and am seriously ready to do something. I guess I've been spoiled over the past several years riding a GSX-R 1000, those are good brakes. I've read a few threads here regarding pad...
www.hayabusa.org
ottafish
Donating Member
Just want to check, that you’re referring to the callipers?
Reason I ask is a few of us have upgraded to a R1 master cylinder, not calipers
Raul_923
Registered
Yes calipers and master cylinder also
Raul_923
Registered
Thank you so much
mabupa
Donating Member
You are very welcome!
Similar threads
