I have a 2007 Busa with a 1441. The issue I am having is with the clutch. When I try to launch the bike there is very little play in the clutch. I have tried both after market an OEM clutch levers. When launching I pre-load the clutch, but after that when I try to release the clutch slowly the clutch engages fully. I can move the lever closer to the bar or have it further, but it still engages fully. After this happens the bike bogs and the result is a poor sixty foot.
Clutch
1. APE Trac King Clutch Pak - Stack height is fine, clutch fibers and steels are fine.
2. Welded one piece - Tried both a Brocks one piece and welded one piece.
3. Clutch springs - They are not the heavy duty springs, but have washers. Tried to run thicker springs without the washers and the clutch was blowing through the clutch.
4. Brocks clutch mod.
5. Slave support bracket.
Thanks in advance for the help. lease:
Plantinit
Clutch
1. APE Trac King Clutch Pak - Stack height is fine, clutch fibers and steels are fine.
2. Welded one piece - Tried both a Brocks one piece and welded one piece.
3. Clutch springs - They are not the heavy duty springs, but have washers. Tried to run thicker springs without the washers and the clutch was blowing through the clutch.
4. Brocks clutch mod.
5. Slave support bracket.
Thanks in advance for the help. lease:
Plantinit