cluster question

[BigBallin]

i sent my cluster off to get new dials. now the temp and gas gauge are way off. i did the reset and it didnt fix the problem. the needles never touch the bottom stopper. could i possibly just open the cluster up and push the needles back down?

 

[frisbee]

The needles were probly put on in the wrong position . You can open up the gauges and pop the needles off. There should be a thread here showing how to get the needles off correctly . all I know is its easier to use a spoon to pop them off .

 

[OUTLAW1300]

If you push them down, they will just spring right back up.

 

[fsusux]

Carefully pry the needles off, do the reset procedure again then carefully replace the needles in their default positions.