Best mod EEVVVVERRR!!!!

[DR1300R]

18-40 justa cruiser..

[mjn]

did it

 and dn 1 in frt. which is like another 3 up in rear. I feel ya bro.

...from now on forget the readings on your speedo.Readings will be more or less round 10-15% more for the same speed.Anyway I can feel your happiness.Irealy do.Busa should have had shorter gears I must admit

Yep....keep the power on as she comes back down....just touches down nice and easy....

[Commuta_Busa]

most of the times when someone says they need more power I'll tell them to play with the sprockets first.

Whenever you make drastic changes to the bike it becomes a whole new learning experience.

[bacharles]

16/42 is always a good setup. Most people seem to run this setup.

[mjn]

Unfortunately, I didn't get to have any more fun today....it rained like a cow pissin on a flat rock here.... Dangit!!!

[The Big Red One]

I did the same thing about a yesr ago. I changed back to stock about 2 months ago and I am much happier. I dont like cruising at 80 and have the RPM way up there. That is just me though.

I went down one tooth up front and rpm's wise it wasn't as bad as I expected......although over 80 the vibes do get pretty annoying. I'm usually either around 75 or in triple digits tho, so the vibes aren't usually that big of an issue  

But if I regularly cruised over 80, the 16 front would have to go  

[dolilind]

i agree on the 16/42 awsome setup

[99'busa]

I did the same thing about a yesr ago. I changed back to stock about 2 months ago and I am much happier. I dont like cruising at 80 and have the RPM way up there. That is just me though.

I went down one tooth up front and rpm's wise it wasn't as bad as I expected......although over 80 the vibes do get pretty annoying. I'm usually either around 75 or in triple digits tho, so the vibes aren't usually that big of an issue  

 But if I regularly cruised over 80, the 16 front would have to go  

the vibes are probably from the aftermarket sprocket not having the rubber bushing