Well, I have almost finished all the mods I set out to get done this round. Not exactly like I had initially planned, but nonetheless.
PCIII is installed and I only need to install the map provided by one of the members from here (Thanks to thepushercg).
Front sprocket has been replaced with a 16T.
Airbox mod has been completed.
K&N air filter has been installed.
Marble mod has been done. I had intended to do the alternate PAIR to crankcase mod, but have learned that mod may not be the best to do. I will get blockoff plates sometime soon and do the mod correctly.
I have the cans pulled, and will be pulling the headers in the morning. My Yosh R-22 full system is scheduled to show up tomorrow. I will get that installed, put the plastics back on and give it a whirl.
I also bought an adjustable camera mount for the tank. This will allow the camera to move fore and aft, up and down. I hope to give that a shot tomorrow as well.
I hope it works like it was advertised... I bought a camcorder which uses AA batteries and an SD card for memory today for under $100. With a 4GB card ($26) it will hold over 2 hours of video. No chargers to lug around. Batteries can be bought anywhere if they go dead, SD card can be bought nearly anywhere while on the road as well.
Now if the weather willl just hold out for me to get a ride in tomorrow afternoon.
PCIII is installed and I only need to install the map provided by one of the members from here (Thanks to thepushercg).
Front sprocket has been replaced with a 16T.
Airbox mod has been completed.
K&N air filter has been installed.
Marble mod has been done. I had intended to do the alternate PAIR to crankcase mod, but have learned that mod may not be the best to do. I will get blockoff plates sometime soon and do the mod correctly.
I have the cans pulled, and will be pulling the headers in the morning. My Yosh R-22 full system is scheduled to show up tomorrow. I will get that installed, put the plastics back on and give it a whirl.
I also bought an adjustable camera mount for the tank. This will allow the camera to move fore and aft, up and down. I hope to give that a shot tomorrow as well.
I hope it works like it was advertised... I bought a camcorder which uses AA batteries and an SD card for memory today for under $100. With a 4GB card ($26) it will hold over 2 hours of video. No chargers to lug around. Batteries can be bought anywhere if they go dead, SD card can be bought nearly anywhere while on the road as well.
Now if the weather willl just hold out for me to get a ride in tomorrow afternoon.