320mm rotors

[zeepopo2]

Anyone know who makes a 320mm rotor for the Gen 2? I got a set of 6 piston ISR calipers and they are for 320mm rotors. Getting just the edge of the pad not wearing away properly. Good thing I'm using the included pads that came with the calipers. 6 piston pads ain't cheap. After this gonna go with. The EPFA pads for these calipers. Gotta find a 320mm rotor first though.

 

[Dai.]

Braketech make 320mm and 330mm rotors

 

[zeepopo2]

Braketech make 320mm and 330mm rotors

I looked, only found the 330. I'll give them a call.

 

[Dai.]

I looked, only found the 330. I'll give them a call.

Just means you’ll run a set of 10mm caliper spacers to push it out a littler further.

 

[zeepopo2]

Just means you’ll run a set of 10mm caliper spacers to push it out a littler further.

The outboard part doesn't worry me, as you say i can use spacers. But the specs on the ISR caliper says up to 5mm thick rotors. 330 are 6mm. Gonna have to verify. Weird if it wouldn't take a 6mm rotor.

 

[zeepopo2]

Braketech make 320mm and 330mm rotors

So Braketech got back to me. They don't make a 320 rotor. Only 310 and 330 at 6mm thick.