my bike is still hesitating at 2200. the service "guy" tells me i cant cruise in first gear at 2200 rpm, that "any" bike will hesitate at that rpm...? what the **** ?! is that true?
?
micron 4-1, pcIII, stock filter [now] installed from dealer.
05busale re-installed pcIII map for micron from power commander website. 05busale said previously installed map was corroded and missing half of map [installed at dealer ! ]. after 05busale reinstalled the map and i replaced the BMC filter [ which was when this all started] back to the stock filter everything was good until today when it started hesitating again in first at 2200.
service manager says to disconnect pcIII to see if unit is bad...?
this is an '06 with 2000 miles under warranty.
do these bikes really hesitate at 2200 while cruising in first??? service guy says i cant putt around in first at 2200...
micron 4-1, pcIII, stock filter [now] installed from dealer.
05busale re-installed pcIII map for micron from power commander website. 05busale said previously installed map was corroded and missing half of map [installed at dealer ! ]. after 05busale reinstalled the map and i replaced the BMC filter [ which was when this all started] back to the stock filter everything was good until today when it started hesitating again in first at 2200.
service manager says to disconnect pcIII to see if unit is bad...?
this is an '06 with 2000 miles under warranty.
do these bikes really hesitate at 2200 while cruising in first??? service guy says i cant putt around in first at 2200...