lankeeyankee
Banned
Finished the following for the 2013 Riding Season.
1) Oil Change Filter Change, including driaining the oil cooler and lines.
2) Flushed and replaced all hydraulic fluids.
3) Replaced Sprocket Cush Drives.
4) Resurfaced Clutch Steel Plates.
5) Replaced rear brake pads with OEM pads.
6) Inspected front oem sprocket (didnt replace due to no wear showing)
7) Inspect, Cleaned, and lubricated all wheel bearing,
8) Replaced all plastic body clips.
9) Inserted white fairing screens
10) Morimoto H1 Low Beam Projector with a 5K 35watt HID
11) Nissan Maxima High Beam projector lens with a 5500 55watt HID
12) Remove restriction on ECU.
13) Re-Shim brake and clutch lever to remove all slop.
14) Retorque all hardware.
15) Install dual orange filiment bulbs in the front turn signals (Orange running lights brighter blinking turn/flashing signals)
16) Install LED Orange /Red switchbacks in the rear turn signal pods (Read tail lights / orange turn signals)
17) Kanji engraved Stator Cover.
1) Oil Change Filter Change, including driaining the oil cooler and lines.
2) Flushed and replaced all hydraulic fluids.
3) Replaced Sprocket Cush Drives.
4) Resurfaced Clutch Steel Plates.
5) Replaced rear brake pads with OEM pads.
6) Inspected front oem sprocket (didnt replace due to no wear showing)
7) Inspect, Cleaned, and lubricated all wheel bearing,
8) Replaced all plastic body clips.
9) Inserted white fairing screens
10) Morimoto H1 Low Beam Projector with a 5K 35watt HID
11) Nissan Maxima High Beam projector lens with a 5500 55watt HID
12) Remove restriction on ECU.
13) Re-Shim brake and clutch lever to remove all slop.
14) Retorque all hardware.
15) Install dual orange filiment bulbs in the front turn signals (Orange running lights brighter blinking turn/flashing signals)
16) Install LED Orange /Red switchbacks in the rear turn signal pods (Read tail lights / orange turn signals)
17) Kanji engraved Stator Cover.