I know this has been discussed many times on the org but once it goes past page 4, it kinda drifts away. Now that I've done everything else for canyon/twisty handling, the last logical mod to do was install the shorter rear shock arms. The following pics show the experience....
1st is the 1/2" solid rod inserted through the center of the swingarm axle (must secure/elevate the bike without the rear stand since the swingarm assembly must be able to move during the shock arms r&r).
1st is the 1/2" solid rod inserted through the center of the swingarm axle (must secure/elevate the bike without the rear stand since the swingarm assembly must be able to move during the shock arms r&r).