the thing is that the clutch does not work at all... i will buy a new sprocket cover and hopefully it doesnt crack again... it was weird ..the bike was running fine ,i put a new chain on becuz the old 1 was stretched out to ****! but from it being loose i just tighten it up like a champ but i still had like 1/4" slack on buttom...then 5 minutes later the clutch slowly stopped working as i pulled in my driveway ..i seen the whole clutch basket moving (where the rod was but i didnt see a crack till later) i took the sprocket cover off and i had some rust or oil build up on the rod but the rod just wasnt pushin in the clutch and instead push out the other way and cracked the sprocket cover...hopefully it was just the over!!