Shipped from Scott Davis (Davis High Performance in Canada) today, hope to see it next week some time.
Xona 49mm turbo with UHF (ultra high flow), pretty small sized but hopefully packs a crazy spooling punch, 49-51S with 0.52 AR Tial Housing
Tial MVS 38mm wastegate
Go Fast Bits SV 52 blow off valve (very compact)
Liquid intercooled plenum with heat exchanger, electric water pump, billet throttle body adapters
Extra bungs to measure intake air temp before and after the intercooler, and water temp of the heat exchanger
Couple of different exhaust options, full pipe with muffler, and a short slash cut right under foot peg, may need to extend this back some depending on how my foot does.
1000cc uppers using stock fuel rail with billet insert (enough fuel for 400hp on E85 is all that I am targeting).
Bosch 200 fuel pump
Motor parts
Wossner rods
10.5:1 MTC drop in pistons
ARP head studs
Cometic gaskets
47# valve springs
Xona 49mm turbo with UHF (ultra high flow), pretty small sized but hopefully packs a crazy spooling punch, 49-51S with 0.52 AR Tial Housing
Tial MVS 38mm wastegate
Go Fast Bits SV 52 blow off valve (very compact)
Liquid intercooled plenum with heat exchanger, electric water pump, billet throttle body adapters
Extra bungs to measure intake air temp before and after the intercooler, and water temp of the heat exchanger
Couple of different exhaust options, full pipe with muffler, and a short slash cut right under foot peg, may need to extend this back some depending on how my foot does.
1000cc uppers using stock fuel rail with billet insert (enough fuel for 400hp on E85 is all that I am targeting).
Bosch 200 fuel pump
Motor parts
Wossner rods
10.5:1 MTC drop in pistons
ARP head studs
Cometic gaskets
47# valve springs
Last edited: