cipher5791
Registered
Originally I had planned on doing nothing but a PC3 but I ended up landing a great deal on the exhaust. It is a TI Force full system I bought from a guy who gave me a deal I could not refuse. My tag was mounted on the rear brake but I had to modify my bracket and move it to the other side. My cans were Micron shorties.
I did purchase the PC3 and installed it along with the exhaust. I also had the starter kickback on me and tear the starter clutch into pieces and the Idler gear mount. Thanks to a mechanic friend of mine who builds drag cars, Schnitz racings TI sleeve, and ebay, I saved a lot of money and got the bike back on the road without replacing the upper case.
Waiting on Speedo Healer and R6 throttle tube to come in.
I almost forgot about my no-cut frame sliders and the intergrated tail light.
I did purchase the PC3 and installed it along with the exhaust. I also had the starter kickback on me and tear the starter clutch into pieces and the Idler gear mount. Thanks to a mechanic friend of mine who builds drag cars, Schnitz racings TI sleeve, and ebay, I saved a lot of money and got the bike back on the road without replacing the upper case.
Waiting on Speedo Healer and R6 throttle tube to come in.
I almost forgot about my no-cut frame sliders and the intergrated tail light.