Tighten up the rear shock

[Big D's Busa]

Hey guys I have scretched my bike out with extensions. Im gonna try to tighten the shock all the way up so it wont rub. How do I go bout doin this, will I need that special tool for it. I will prolly get a different shock later on, but just tryin to make this one work for now. thanks for everything

 

[m_ridgeway]

you turn the nuts with a spanner wrench.

if you have the stock arm the bracing may make this near impossible. if you cant get at it you can try a long punch or remove the shock.

 

[Irishluck]

Or try a flat head screwdriver and a hammer. Also get you a set of adjustable lowering links then you can set the ride height you desire.

 

[dalaster88]

get a flathead screw driver and there is a screw that ticks where the shock meets the swingarm on the clutch side. Youll have to get down to see it, but rotate it clockwise to tighten the rebound of the schock. Thats what I do when I ride 2 up.