Freechance
Registered
This mod is for the throttle tube to make it a quicker throttle..
I know most of us already have done this mod but for the newer guys heres a mod that dont cost much but makes a big difference for little money..
Instead of having to reposition your grip before wot this mode will help..u dont have to give it a 1/4 turn before wot ..u can either do a 1/5 or a 1/6 for wot..
Most people get the r1, because some say the r6 tube is a bit much..i read several sites because there was alot of guys getting the wrong tube for the r6 mod which was basically same as the r1 tube..
So heres some info on the tubes..
I installed this on a gen1 which i believe will be the same as a gen2..
Stock hayabusa = 1/4 turn to wot
I believe these are both 1/5 to wot
R1 4yr-26240-02-00. I believe o2-04
R6 5sl-26240-01-00. 99- 05 i think are the same..
Now if u want the 1/6 turn its
2c0-26240-00-00.
And thats off a r6 06 anything older is the 1/5 turn instead of the 1/6
Now the 1/6 is about twice the price of the 1/5 turn...
Also on the 1/6 turn throttle tube u will have to do a couple of things to get it to fit but ill walk u threw it..now the 1/5 so they say is a direct replacement...
So heres how to do the 1/6 turn throttle mod...hope this helps someone for a easy install..
This is how i did it
I would start by adjusting the fittings all the way in..
And for mine i left them all the way in so your done there..
Next u can take the top adjustment all the way off which will help with installing the larger throttle tube..
But leave that eye piece in there..
I also unbolted the lines from the frame for more slack on the cables..it helps..
Now for that bottom adjustment u need to get that first nut toward the front of the bike then tighten back up..like so
Now your done with that adjustment..
I know most of us already have done this mod but for the newer guys heres a mod that dont cost much but makes a big difference for little money..
Instead of having to reposition your grip before wot this mode will help..u dont have to give it a 1/4 turn before wot ..u can either do a 1/5 or a 1/6 for wot..
Most people get the r1, because some say the r6 tube is a bit much..i read several sites because there was alot of guys getting the wrong tube for the r6 mod which was basically same as the r1 tube..
So heres some info on the tubes..
I installed this on a gen1 which i believe will be the same as a gen2..
Stock hayabusa = 1/4 turn to wot
I believe these are both 1/5 to wot
R1 4yr-26240-02-00. I believe o2-04
R6 5sl-26240-01-00. 99- 05 i think are the same..
Now if u want the 1/6 turn its
2c0-26240-00-00.
And thats off a r6 06 anything older is the 1/5 turn instead of the 1/6
Now the 1/6 is about twice the price of the 1/5 turn...
Also on the 1/6 turn throttle tube u will have to do a couple of things to get it to fit but ill walk u threw it..now the 1/5 so they say is a direct replacement...
So heres how to do the 1/6 turn throttle mod...hope this helps someone for a easy install..
This is how i did it
I would start by adjusting the fittings all the way in..
And for mine i left them all the way in so your done there..
Next u can take the top adjustment all the way off which will help with installing the larger throttle tube..
But leave that eye piece in there..
I also unbolted the lines from the frame for more slack on the cables..it helps..
Now for that bottom adjustment u need to get that first nut toward the front of the bike then tighten back up..like so
Now your done with that adjustment..