quick throttle review

[thepushercg]

i bought the r1 and r6 throttles, i got the r1 in case the r6 was too much.

finally got to ride today with the r6 throttle controls installed,
i like the difference. now heres my take on this set up.

i have read and read about doing it, some were worried it would throw too much too quick, and yes it can do that.

for a seasoned rider, you can handle it without a problem. for a new busa rider, i would not recomended you doing this. learn the bike , then relearn the bike again before modding this, it can get you into trouble very very fast.
im not saying im that good,im not, i respect the bike and what it can do, this is an added plus to what it can do.
around town riding did not suffer, you learn the throttle quickly,
for the wheelie lovers, oh yes you will like this.

im keeping the r6 version on the bike, one of the best mods i have done

[kml]

What year r6, what parts, what's involved in the install?
Got pics?

cheers
ken

[thepushercg]

its just the throttle housing, an easy swap, ill get you the part numbers tomorrow.

[kml]

its just the throttle housing, an easy swap, ill get you the part numbers tomorrow.

You are the man!

cheers
ken

[heavyjeffd]

Very nice, I'm also interested as well. Thanks.

[darth frosty]

never heard of this, can you give me a simple heads up in one sylable words I can understand?

[99'busa]

[mike04busa]

I ordered one for the R1. A 2004 R1 will work, not sure about the r6 but I would imagine the same year would fit.

[thepushercg]

never heard of this, can you give me a simple heads up in one sylable words I can understand?

it shortens the throttle cables.

meaning when you bend your wrist to go full throttle you are getting there a lot sooner with this mod.

[thepushercg]

the r1 $9.16 http://www.ronayers.com/BrowseParts.cfm?product_id=4YR-26240-02-00


the r6 $7.46 part number is 5SL-26240-01-00

local yamahahammer shop will have them or can get them.

[DR1300R]

[twotonevert]

So is this like a quarter throttle?

[speed750]

It's not as quick as a quarter thottle. I put on the R1 last week and I love it. It is about 15% quicker than stock.

[mike04busa]

The channel in the throttle tube is larger in dia. So the cable gets pulled at a higher ratio(sooner or quicker) you won't have to rub your elbo on the ground to pin it.You will reach full pull sooner.

[thepushercg]

The channel in the throttle tube is larger in dia. So the cable gets pulled at a higher ratio(sooner or quicker) you won't have to rub your elbo on the ground to pin it.You will reach full pull sooner.

exacto........

[DR1300R]

This is not needed for us old folks that just cruise around..

Or is it?

Hummm let me see..

[jjmetheny]

This is not needed for us old folks that just cruise around..  

Or is it?  

Hummm let me see..  

Only when you're trying to keep up with us youngsters.

[onebadgsxr2004]

awesome..... this is the info I needed!!! Thanks again all!! I'll be sure to keep ya posted with my lil toy hehehe

[megawatt]

it shortens the throttle cables.

meaning when you bend your wrist to go full throttle you are getting there a lot sooner with this mod.

Ahhhh now I see the light and have an idea of what your talking about. THX.

[Spudley]

I'm interested....and Doyle, me thinks the "youngster" hath made a challenge.....I'm bringin' a camera for the look on "his" face......