need to install 5000k HID kit

[faygoman1]

need to know how to install 5000k HID kit

 

[mrninja9]

call me 3093715614

 

[BigBSBusa]

Or do a search.

 

[NINJA KILLER]

Or do a search.

 

[High-Gain Busa]

need to know how to install 5000k HID kit

Assuming you have already purchased an H7 low beam HID kit.

1. Disconnect battery ground cable
2. Remove rear meter panel item (10) 2 clips, 1 screw
3. Remove upper meter panel item (1) 4 clips
4. Remove right hand meter panel item (6) 1 allen head screw, 1 phillips screw

 

[High-Gain Busa]

5. Remove dash assembly bolts, 2 (11)
6. Pull dash completely out of upper rubber grommets firmly far enough to reach wiring harness on left rear.
7. Slide rubber boot back from harness enough to depress harness connector retaining clip
8. Remove dash assembly

 

[High-Gain Busa]

9. Unplug low beam bulb connector (5)
10. Remove socket cover (3)
11. Remove low beam bulb by turning counter clock wise (2 & 8) are together as an assembly

 

[High-Gain Busa]

12. Install HID kit per instructions running wiring behind dash to the right side air intake tube
Hid ballast can mount nicely in its bracket on top of the right hand air intake tube with sheet metal screws if you choose. Seal tops of screws with permatex sealer.

 

[High-Gain Busa]

13. Connect battery ground cable and test.

14. Reverse disassembly instructions

 

[High-Gain Busa]

Come to think of it, on step 11 the low beam is held in place with a retaining clip... The bulb should pull out after removing the retaining clip. It's the high beam that twists in.

Been a while

 

[Lycan]

Nice instructions AND diagrams, never let it be said you won't help a member out!

 

[ks-waterbug]