need feedback on chinese import rotors

[thelakeshow2k]

for those that have purchased these rotors, can you give some feedback (including how many miles you have put on them and any other brake mods including pads & ss lines).

it has been a while since i saw a similar post so i thought it would be interesting to see if your positive feedback holds up months after you've purchased them. thank. you

[Strife]

Price is tempting,but to put my life on the line for a product from a country that is known for shady craftsmanship on things the produce.... I would pass.

[twotonevert]

Moved to Polls for housekeeping.

[mmissile]

[racerV]

I have witnessed others that purchased these with negative results such as stress fractures. Not recommended..

[GSXcite]

Not on my busa.

[Black Sheep]

From my experience, I have researched extensively for all Busa aftermarket parts, always heard negatives with regards to these type of deals.
Posted via Mobile Device

[Dehning]

Here we go, this is the 3rd thread about this in less than 2 weeks.
After scouring threads on this board, the blackbird board and the VFR board I came to the conclusion that many people had something negative to say, but virtually nobody had any real proof. I saw one picture where a "cheap" rotor had started to fracture at the rivet. In the same space I saw lots of reports of warped OEM and high dollar units.
So with that in mind I purchased a set of the "cheap" wave rotors off eBay along with the cheaper sintered pads (think EBC HH) from Sixity (also on eBay). The whole lot including shipping cost me $275 ( 3 rotors + 6 pads). I'll attach pics, but the fit & finish is excellent, and now that I have put a few miles on them, I'm very happy with the stopping power.

I don't race my bike, if I did, I would probably buy the best equipment money can buy just in-case it made a difference. If you have the money to spend on a top of the line Brembo system, then more power to you, but what my research showed me is that that I'm no worse off than OEM rotors.

[thelakeshow2k]

Nice photos. My economic philosophy is to stay within my budget without buying "bad" product. Instead of $100 jeans, I buy $35 jeans. I can't afford a $600 Arai helmet so I bought a good helmet for 1/3 the price. My choices aren't top of the line but they do what they're supposed to do and I can afford them.

If these rotors aren't inferior, then I would purchase them and use the savings for something else. If I start hearing people say that they don't do the job they're supposed to, then I would look elsewhere. JMHO