More shiny new things

Djxtrodinaire

Registered
Joined
Oct 18, 2008
Messages
2,235
Reaction score
7
DUde, those gold pieces are nice!! I had some of those levers (or similar looking anyways) and they both hit my plastics. The clutch wouldn't work, period. wouldn't engage. Guess that's what I get from buying from Hong Kong!

Hey did you try adjusting the lever position?
the first time i tried to start the bike and it did not.
I just moved the adjustment to 2 and it worked.

Djxtrodinaire

Registered
Joined
Oct 18, 2008
Messages
2,235
Reaction score
7
+1
Make sure it says on the can 'Blanca Approved' :laugh:
At home depot they sell cheap plastic tarps for $2.
Buy one , lay it over your bike and poke a hole in it, then pull master cylinder thru the hole and tape it up.
This way you can spray all you want without worry of getting any on your bike.
I did it this way to prevent messing anything up by taking it off.
All else looks good. I like the gold



I gotta stop listening to people :whistle:

first coat

IMG_0009.jpg


IMG_0007.jpg

Blanca BusaLess

Suffers from PBSD
Donating Member
Joined
Oct 7, 2009
Messages
23,678
Reaction score
4,991
Much Better . Black and Gold will look nice and this way the master cyl will be more subdued accenting gold res even more.

Big E

Donating Member
Joined
Dec 7, 2002
Messages
5,437
Reaction score
447
:beerchug:. Looking good. I'll be bringing my bike to your garage soon.

Djxtrodinaire

Registered
Joined
Oct 18, 2008
Messages
2,235
Reaction score
7
to take out the OEM rear brake reservoir behind the rear cowl. All you need to do is take out all of the bolts and plastic pins on the right side. pull the plastic out and down just enough for you to use a socket wrench on the reservoir.
Back
Top