Modifications

Speedfreak391

Donating Member
Registered
Has anybody done the intake cam swap? And if so what kind of gains did you get from it? Also I have heard alot about this air box mod, and I even see there is already a post on it. But there is no specifics on what kind of gains you can get from it. Can anybody help?
 
I don't think it's worth it for only 4-6RWHP!

For only a couple hundred more you can have both(intake/exhaust) Yosh Stage 1/Web/BDE, etc. Cams and gain about 15RWHP!
wink.gif
 
ok now you need degreeing right. and what is suggested for an all stock engine ect... and what would be too radical for it or as radical as you could go on a stock engine? and what is with regrind as well as hardweld vs billet...                                                                                                                          


.360/.332 246° / 238°
.377/.350 240° / 230°
.378/.330 244° / 226°
.383/.330 253° / 226°
.395/.332 242° / 239°
.395/.378 242° / 244°
.395/.383 256° / 253°
.345/.292 234° / 214°

Which is best which is too much and why???

And what does it give you in return???

Is it worth it and how much hp/tq should you expect from it.



<!--EDIT|FAKK2
Reason for Edit: None given...|1115641691 -->
 
Back
Top