brocks has the handle bars with a larger hole to allow the forks to slide through to lower the front. those are nice bc they keep the factory look. some companies sell spacers but those arent for me. you can buy a whole triple assembly from alif, k factory, agras, over speed, etc. dme, 1 stop, sell drag race “skeleton” triples and remove the key mount, are lightweight, but u have run and triple handle bar mount like from votex or woodcraft. you can also buy a gen 2 upper triple clamp and use with 7/8 bars. depending on the upper clamp and bars you choose, you could have clearance issues with the inner plastic around the cluster if you are using the huge factory master cylinders. im running a gen 2 roaring toys with gen 2 knock off heli offset bars for now. if you search i posted some pics of installation on site. lots of options.I have a full motorcycle lift and stand to do the mod.
Can you direct me to a part number?
Lowering the rear is not straight forward at all. And can't find any good info about how to do it with out taking out the complete exhaust system.
It’s been a minute since I’ve had a full stock exhaust, but you can put these on with ease. At most you’d have to remove the left hand muffler tiger the bolt to slide out. I have my rear lowered with these and love them.
View attachment 1667775