Lowered front end... suspension set-up...

[Fan2zee]

I just lowered the Front-End even more so...

And am going to tighten/harden up the front end so that it will not collapse as easy.

How hard of settings are you guys running on your lower bike... be specific with the # of clicks your out from the clockwise position...

1) The top of the tubes setting clicks..
2) The top of the tubes # of lines
3) The bottom of the tubes setting clicks..

Thanks

 

[BigDiesel]

im givn this a

wanna know how it goes...dropppin my front soon too!

 

[mrninja9]

well i left mine stock turn it 3 clicks down it should stiffen you up to the point you need then so run around if you need to go any further do it i knwo guys that you cant even see the lines so you should be fine

 

[mrninja9]

well i left mine stock turn it 3 clicks down it should stiffen you up to the point you need then so run around if you need to go any further do it i knwo guys that you cant even see the lines so you should be fine

 

[heavybusa]

I'm a big boy so I went 4 clicks in the rear and 2 in the front (i think), only rubs at 100+ with a rider hitting a bridge.

 

[Wolfman]

You could just get a strap. That is what I use to cinch it down at the strip. That way I have normal ride height the rest of the time for the twisties