The black ones , someone mentioned the pegs spinning from weight with just the bolt going through. So I figured I would mention it here to see if 60 + busa had any issues with that happening.
Hello again, mine have not spun, one end of the modified part is manufactured with a cone shape that presses in the peg and the other end is locked in with two 3mm pins. I’m sure you could spin the peg with enough effort but mine has not spun and I raise up off my seat on almost every ride but I do not stand up, I never have stood up on my street bikes. Even the factory setup is springy and I don’t trust them at my weight. I used blue loctite and I had to use quite a bit of force to remove the bolt today.
www.hayabusa.org
Thank you. This Saturday I will bring them back to work. I do work in a machine shop. Our tool maker will help me finish them to your specifications.
This one is because of how far they stick out? Feels uncomfortable. Is that what corrects that issue. I normally put my foot straight down and I can't. I see that's where you got the other part from. You cut off the part I'm pointing too?
Ok I understand now. You milled the part that came with the dually part. I though you cut it off the part that connects to the bike like I pointed too. I'm glad I did not mess that part up.
^ this statement is correct, the only part that needs to be machined is from the Dually. Glad you caught it in time.
Hi from one oldsoldier to another, do you have the details for your Gillies front pegs!? was it a straight forward fit, and did you contemplate doing the rears? Ive been looking at the gillies stuff as hate the look of the stock footpegs, not to mention how uncomfortable they are. Regards AdeGot carried away- only excuse is single, no other responsibilities or expensive interests - sons are independent and doing well and it's the last bike I'll ever own/ride! Yoshimura radiator/oil guard, tail tidy and crash pads, ASV levers, Helibar risers, GSG front and rear axle sliders, Puig screen, Fuzeblock, Scottoiler, Denalli sound bomb, replacement black stainless steel nuts, bolts, fittings everywhere, Akropovic 4 into 1 Titanium Racing Line exhaust, BST carbon wheels, Gilles Tooling lowered foot rests, Hepco & Becker Easyrack/C-Bow sidecarriers with Journey top case and Orbit side cases plus OEM tank bag.
View attachment 1661175
"a few" lolol
Hello AdeB and apologies for the late response - been ill and have only just seen this. I was misled on the Gilles foot pegs - ordered via eBay and they turned out to be fakes - first time I've been caught like that - guess you're never too old to learn! Ended up getting the Puig ones (which are bike specific) from Pyramid Plastics - 20mm lower, which for me turned out to be enough of a difference and are comfortable. Everything else as described.
Greetings,
Good idea and the size of the rear tire is a 190/50 or its a 180/55?
