Kill switch housing

[hayabusa07]

Can anyone tell me how they fixed their kill switch housing when the plastic pin that holds it in place broke off?

 

[nosbig]

I don't know how anyone else has done it. but couldnt you just drill a hole where the old one was and run a small screw in it. then cut the head off and file the threads that are still sticking out of the housing. Seams like it would work to me with nothing out of pocket and should be done in less than an hour.

 

[hayabusa07]

That's what I was thinking about doing but wasn't sure

 

[mjl3truck]

That way will work but Brock's has a pin.
It is more expensive being that it is Brock's and all but it is high quality and drops right in.
http://www.brocksperformance.com/Throttle-Pin-Mount-Busa-0813+I962621+C275.aspx

 

[GIXERHP]

I have done it but have no pics, that i know of
Sorry

 

[hayabusa07]

Thank you guys for your help I have a first generation so I'm trying to see if Brocks has one for my year but if not then I'll be making my own

 

[hayabusa07]

It looks like Brocks only has one for the second generation