Is this used stator useable?

[Lodi]

I encountered charging issues during my last ride in October. I was getting enough juice to run the bike, but not to charge the battery, so I rode home and parked it to deal with later. I figured the most likely culprit was going to be a bad stator and I picked up a used OEM one that’s been sitting on my bench for the past couple months. I know, bad idea and I’ll get to that in a minute. Well, I finally got around to doing some testing and my stator is fine and the fix was the regulator/rectifier.

So I grabbed the used stator I’d bought and was taking some pictures to re-list on eBay when I noticed the small nick and some cracking where I’m pointing in this pic. Does that mean this stator is garbage? I don’t want to list it if just going to cause someone problems. Thanks

 

[c10]

It should be fine . Many stators are bare copper wire . Looks like some of the insulation or dip applied has come off . Most likely due to thin coat or rough handling

 

[c10]

500W Stator for Suzuki GSX1300 GSX 1300 B-King / Hayabusa 2008-2019

Brand new aftermarket 500W Stator Direct replacement to your original unit Plug-and-play, direct fit, easy installation Highest grade of lamination materials Highest grade of copper winding, resistant

www.rmstator.com

Photo / link for comparison

 

[WuzzaCBXRider]

I wonder if a lil dab of epoxy would fix that right up?

 

[c10]

I wonder if a lil dab of epoxy would fix that right up?

Maybe , but chose a oil resistant one / heat also .