I need a map! Hahn stage 1

[Jimingle10]

bought a used hahn stage 1 kit for my 2000 busa.

I have Power Commander II (not pc3-usb)

Does anyone have a link or a map that will work for me as a test? I plan on getting it tuned immediately, however I would like to start it up and test/check for leaks.

Motor is 100% stock, just bolting on hahn kit

[chunk1340]

bought a used hahn stage 1 kit for my 2000 busa.

I have Power Commander II (not pc3-usb)

Does anyone have a link or a map that will work for me as a test? I plan on getting it tuned immediately, however I would like to start it up and test/check for leaks.

Motor is 100% stock, just bolting on hahn kit

I would contact them (Hahn) directly.

I had this same query with the Velocity Stage 1 and I was informed that the bike would run on idle just fine without a map. Velocity were fine with me and sent me the map I needed and I wasnt the original purchaser of the kit.

[tcbusa]

u can start it up and run it at idle without a tune no problem. it has the same a/f ratio at idle.

[Jimingle10]

Hahn is shutdown for like a month...they are moving to florida. Noone has a similar setup they wanna share

[BUSA GHOSTRIDER]

Is that a/f ratio at idle the same for all stage 1 turbo systems?

[Jimingle10]

would velocity stage one map work for me for hahn stage one? just for a quick test run...a little more than idle but not trying to go wide open without a custom tune.

Anyone have a turbo map?

[smithabusa]

just go to a dyno tuner that has tuned many turbo bikes and knows what they are doing, even if you had a map from hahn they are pretty crappy.