How do I adjust the PC3?

GSXTacy

Mr. January
Donating Member
Registered
OK, I'm running the PC3 with a full muzzy exhaust. I have a really hot map in it that I love while I'm at full throttle. I would like to tone it down some at part throttle for highway riding because my mileage sucks. I must be running very rich because people who are behind me say I'm gassing them out with my fumes. How do I keep the punch at full throttle but gain some mileage. I dont want to mess with the map (because I dont know about tuning them) without someone who knows how to mess with it. I dont want to lean it out so much that I hurt the motor.
 
Last edited:
can you just install the PC map from their site that is close to your setup...or even the stock bike map...then replace it with your tuned one when you want to ave more fun
 
can you post a screen shot of the map? I took Professors suggestion and worked the first 10% of the map back to baseline and things are fine on my ride.. back to the mid/high 40s when just cruising along..
 
here is map

pc.jpg
 
I dont have a clue what the numbers mean, thats why I dont mess with them. :laugh:
 
Try something like this in the 2 an 5% rows and see if it helps. It will be a start anyhow.


2% 5%

500 0 0
750 0 0
1000 0 0
1250 0 0
1500 0 -1
1750 -7 -11
2000 -15 -21
2250 -10 -18
2500 -5 -2
2750 2 5
3000 9 15
3250 -2 11
3500 -14 4
3750 -20 -10
4000 -26 -21
4250 -29 -30
4500 -32 -30
4750 -26 -18
5000 -20 -12
5250 -10 -10
5500 0 -11
5750 0 -10
6000 0 -9
 
2 and 5% is about all you are using at highway speeds in those rpm ranges.
 
Hang on!!!!!!! Time out... I screwed up.

I saw the map Randy posted and thought it was yours Chris. I just noticed he posted it.


I need to take a look at what you are running now first.
 
ohChris, you can download the software from their site if you can not find your disk..
 
Back
Top