I have the visionpro HID's on my busa with the relay to delay the firing of the ballast until I get it started. Well, the relay went out the other day so I'm in the process of putting a switch in it's place. I took the nose off and disconnected the relay now I can't get the lights to work. I must have touched something when I cut it out because my low beam fuse was blown in the fusebox. I replaced the fuse and now I've got power back running into the ballast but nothing coming out. I swapped my hi-beam and my low-beam ballast with one another but neither works. Any way to check the ballast or any other ideas on what it could be? I've checked all fuses and my headlight switch, I've run out of ideas. Thanks