Headlight bulb replacement on Gen 1(question)

[ky busa]

high beam went out on my 05 low beam still works are they 2 bulbs or 1 bulb and can you get them at auto parts store and do you have to remove the nose of the bike to replace them. (Thanks for replys)

[Pipefighter248]

H-7 Low beam

9005 High beam

You should be able to get it without removing the nose. The most you would have to take out is the black plastic underneath it.

[pairodice]

any auto part store carries them unless you want to donate extra money to the dealer

[skydivr]

Two different bulbs as mentioned above. From underneath works, also removing instrument panel another way to access. Read the shop manual it's got all the info you need...

[IG.]

Patience, mirror and a flashlight are all your friends.

[ky busa]

Thanks fellow busa riders it lasted almost 5 yrs & 44,000 miles i always run high beam on i just changed it its bright again

[Pipefighter248]

[0132VTSaleen883]

Remove the cover plastics from both sides of the gauge cluster. Remove 2 bolts holding the bottom of the gauge cluster. Then pull the gauge cluster out (there are 2 post on the top of the cluster that pop into rubber grommets). After that the headlights are completely visible and easy to access.