Hazard Button Rewire??

[Ham]

Hi i was wondering if anyone has rewired the hazard button to work as a on/off switch. There are three wires going to it. The wiring diagram colors are wrong.

[13013]

I believe someone on here has done just that. Reworked it to power their gps. Do a search on here for it. I've seen it somewhere.

[Ham]

I believe someone on here has done just that. Reworked it to power their gps. Do a search on here for it. I've seen it somewhere.

ok will do, but if you find it before me drop a link.

[13013]

There's more but here's one..

https://www.hayabusa.org/forum/thre...b-charger-into-my-hazard-switch-today.167065/

[c10]

All the hazard switch is Normally open then when you press the button it goes N/C ( normally closed ) completing the pwr circuit . Thus providing pwr to the turn signals front/rear run through the flasher relay .

[Ham]

There's more but here's one..

https://www.hayabusa.org/forum/thre...b-charger-into-my-hazard-switch-today.167065/

I looked at the switch and understand how it work. The only problem is i would have to take the switch of the bike to run new wire through the oem loom. i think getting it off is a PITA because it is held by some type of funny looking metal bracket.

[13013]

What exactly are you trying to achieve?

[Ham]

What exactly are you trying to achieve?

Here you go, I finished it the next day just now posting.
Wanted to control my Bi-xenon solenoid with the hazard button because i did not want to add switches.

[Kevin Jones]

Thanks guys, I may run scramble with it but prefer momentary so I am not sure do I wanna do that switch or passing switch.

[Kevin Jones]

I set my passing switch to scramble on my ams. Works good.