Got the Montgomery Carbon headlight installed.

[Ratlin’busa]

Got the Montgomery Carbon headlight installed. I did have to trim the round mount tabs on the lower mounts flat to fit down in the headlight spot. So the bottom 2 mounts have a flat spot on the outer edges so they can sit down in against the inside of the nose fairing. Otherwise install/fitment was a breeze. Since the I got the light used it already had the wires spliced with blade connectors to work with the low beam connector. That works as it should.
As for the weight- it’s 4lbs lighter than the OEM headlight with bulbs.
Oem headlight with bulbs- 4.65lbs
Montgomery carbon w/light- .660lbs

 

[sixpack577]

Good save, it looks great.

 

[bigboy]

H

Got the Montgomery Carbon headlight installed. I did have to trim the round mount tabs on the lower mounts flat to fit down in the headlight spot. So the bottom 2 mounts have a flat spot on the outer edges so they can sit down in against the inside of the nose fairing. Otherwise install/fitment was a breeze. Since the I got the light used it already had the wires spliced with blade connectors to work with the low beam connector. That works as it should.
As for the weight- it’s 4lbs lighter than the OEM headlight with bulbs.
Oem headlight with bulbs- 4.65lbs
Montgomery carbon w/light- .660lbs




View attachment 1660820

How does it work at night