GENII Nose assembly hard time

corg78

Registered
Joined
May 9, 2015
Messages
4
Reaction score
0
Hi all, I tried to do some repairs in my Hayabusa 2012 and removed all fairings. Now I am facing the issue of not being able to put the nose back into the frame. I have been looking for tutorial videos on how to put the nose back in the bike, but I only found videos on the side fairings which I can do. I would appreciate if someone could provide me any info, link, manual, video on how to put the nose back into the bike. Thank you

nosbig

Registered
Joined
Mar 14, 2014
Messages
2,396
Reaction score
955
You just have to make sure that you push it on straight. You have to line up the air ducts and the pins that go into the rubber grommets behind your gauges. All four points have to line up at the same time. Then it is just a matter of pushing the pins into the grommets.

Getn off

Registered
Joined
Feb 6, 2015
Messages
954
Reaction score
1,280
Try downloading the service manual and following that. It has pics, but it goes in order and is very helpful. Go to the main page here I believe.
Troy

Blanca BusaLess

Suffers from PBSD
Donating Member
Joined
Oct 7, 2009
Messages
23,678
Reaction score
4,991
Pm me your email or post it here. I have a pdf file with detailed pics and instructions that I'll send you later tonight when I get home. I get off at 9pm eastern. You'll have it by 10. :thumbsup:

Donnie J

Registered
Joined
Jun 24, 2019
Messages
5
Reaction score
2
Pm me your email or post it here. I have a pdf file with detailed pics and instructions that I'll send you later tonight when I get home. I get off at 9pm eastern. You'll have it by 10. :thumbsup:
Sir do you have colored install pics for a 2012 busa? I’m in the same boat with a rebuild

Bumblebee

Registered
Joined
Jul 6, 2018
Messages
33,082
Reaction score
56,306
Sir do you have colored install pics for a 2012 busa? I’m in the same boat with a rebuild

Yep, like Lodi said, after 4 yr they may have got this sorted...

But you have the same problem so it is very understandable why you were looking for this info.

I don't have the info you seek, but someone might. Make sure to check You Tube and type in Gen 2 fairing removal and installation.

RedBull

Registered
Joined
Jul 19, 2003
Messages
10,851
Reaction score
14,304

Donnie J

Registered
Joined
Jun 24, 2019
Messages
5
Reaction score
2
Yep, like Lodi said, after 4 yr they may have got this sorted...

But you have the same problem so it is very understandable why you were looking for this info.

I don't have the info you seek, but someone might. Make sure to check You Tube and type in Gen 2 fairing removal and installation.
Thank you

Boosted Cycle Perf

Donating Member
Joined
Dec 5, 2010
Messages
2,678
Reaction score
3,964



Finally, you post something relevant.

HayaWakened

Gen2 thru and thru
Donating Member
Joined
Jan 28, 2019
Messages
2,295
Reaction score
5,155
Here's this, if not already found...

Back
Top