Gen II exhaust on gen I, am I imagining more power ?

[Black Sheep]

Dnt know my man- I'm trying to install a Yosh R77 on my 05 bike now. I've got a full Yosh TRS system. Hopefully I can use part of the full system to make the R77 fit. Its been done, I love the look of the R77 on the Gen I.

I worked this same mod on my 06, Gen1 header with Gen2 Yosh R-55. Not too many people pick up on it unless they are busa-freaks like us!

[Black Sheep]

Great to know you feel like you get more power.

[Sketchy_Camel]

I worked this same mod on my 06, Gen1 header with Gen2 Yosh R-55. Not too many people pick up on it unless they are busa-freaks like us!

I hear ya Black Sheep- I'm not quite there yet but hopefully with some help, I will have the Yosh R77 Carbon on mine here soon. Now when you say Gen I header, which header are you using. Stock header or aftermarket?

Great to know you feel like you get more power.

lol! I had a Brock Short Meg on my 07- it was sweet, but I want something different and I want to ride with out going deaf! Check your messages bro

[Dehning]

Again sorry to be a little slow, but are you asking if I think that Gen 1 full system will bolt up to a Gen II bike? I would guess yes.

[Sketchy_Camel]

I worked this same mod on my 06, Gen1 header with Gen2 Yosh R-55. Not too many people pick up on it unless they are busa-freaks like us!

Again sorry to be a little slow, but are you asking if I think that Gen 1 full system will bolt up to a Gen II bike? I would guess yes.

Yes- thats what I'm asking You used a Gen II stock header right? The reason I'm being a pain in the butt about this because some people say it won't fit, and some say it does and since you've done it- I taking your experience with this mod very serious. I'm gonna install my Gen I Yosh header on my Gen I busa this weekend and order the R77 pipe and mid-pipe and see if it works. Do you think if I order a FULL Gen II R77 it will bolt right up to the GEN I except for the mounting bracket? Can you tell I want this R77 REALLY BAD!?!?!?!?!?! lol! Be patient with me bro-

[kairles]

Yes- thats what I'm asking You used a Gen II stock header right? The reason I'm being a pain in the butt about this because some people say it won't fit, and some say it does and since you've done it- I taking your experience with this mod very serious. I'm gonna install my Gen I Yosh header on my Gen I busa this weekend and order the R77 pipe and mid-pipe and see if it works. Do you think if I order a FULL Gen II R77 it will bolt right up to the GEN I except for the mounting bracket? Can you tell I want this R77 REALLY BAD!?!?!?!?!?! lol! Be patient with me bro-

If you have a Gen I Busa with a Yosh system just buy the R77 can and clamp Here. I was gonna go with a TRC-D can but decided I didnt want to spend $425 on a muffler.

[Sketchy_Camel]

If you have a Gen I Busa with a Yosh system just buy the R77 can and clamp Here. I was gonna go with a TRC-D can but decided I didnt want to spend $425 on a muffler.

hmmm.... it makes sense but is it that simple? I'm hearing the mid-pipe won't work and talk of taking the exhaust to a muffler/welding shop- I JUST WANT THE R77 ON MY BIKE!!! lol!

[Dehning]

I guess it comes down to this, a muffler intended to fit a Gen I header will not fit a Gen II header and vice versa, but a full system for either model should bolt up to either model fairly easily, with the exception of the bottom mount and the belly cowl. The hangars should work either way.

[kairles]

hmmm.... it makes sense but is it that simple? I'm hearing the mid-pipe won't work and talk of taking the exhaust to a muffler/welding shop- I JUST WANT THE R77 ON MY BIKE!!! lol!

It is that simple. You dont need the mid pipe, all you need is the muffler and clamp.

[Sketchy_Camel]

It is that simple. You dont need the mid pipe, all you need is the muffler and clamp.

Thank you