Gen 2 clutch noise - doesn’t seem normal

[kml]

srm slipper maybe? Mine works great.

http://www.hardracing.com/STM.htm

[RedBull]

srm slipper maybe ?

Mine works great .

http://www.hardracing.com/STM.htm

[vphathom]

it can be the clutch basket springs they get noisy at 10,000 miles . Brocks has a clutch mod repair kit helps with the noise,

[RedBull]

My 2013 does it
too mate sometimes .

I hardly use the clutch
between 5th and 6th .

[MattyIce 79]

Thanks RB for all the vids you post. Much appreciated

[Scott71]

Mine makes a slight noise when taking off from a stop and gets a bit louder when hot-normal for a stock clutch system in these things. I'm not fussed in doing anything with mine-it works fine. I have an up only speed shifter so clutchless shifts are no problem if I want.

Hi Bumblebee can I ask which quick shifter you are using I am considering a trans logic inteli-shift.

[Bumblebee]

Hi Bumblebee can I ask which quick shifter you are using I am considering a trans logic inteli-shift.

That's the one I have and it works flawlessly

[Scott71]

That's the one I have and it works flawlessly

Great that seems to be the best I can find I think I will go with that.

[Scott71]

Great that seems to be the best I can find I think I will go with that.

Did you install it yourself? Was it an easy install as I was going to do this myself and tips and tricks you could offer would be greatly appreciated.

[Bumblebee]

Did you install it yourself? Was it an easy install as I was going to do this myself and tips and tricks you could offer would be greatly appreciated.

It was installed when I got my bike but it looks pretty straight forward to install.

It likes revs to work best, at low rpms I clutch shift...

[Scott71]

It was installed when I got my bike but it looks pretty straight forward to install.

It likes revs to work best, at low rpms I clutch shift...

Hi Bumblebee,

i went for the Translogic quick shift fitted myself a few months ago very pleased with this choice, it has been flawless so far as you said, followed install instructions worked straight out of box had no need to adjust timing pots.

[RedBull]

translogic quick shifter | Busa Mods

Hi everyone new to the forum as i need some help with the quickshifter i just bought but have no install manual' so was hoping somebody here has installed a translogic shifter to the Gen 1. I know theres 4 coil connectors but there is one connector left, and not sure where it connects to. Any...

www.hayabusa.org