Dozerdriver
Registered
Was looking around to find what the front sprocket size is for Gen2 but couldn't find it. Size please... Thanks Dozer.
Front sprocket size?
- Thread starter Dozerdriver
- Start date
Dozerdriver
Registered
I'm sorry.... the nut size. Going to put a 17 on...
17 works, 19 won't...tried for Maxton and they don't make em yet cause there's not enough room. As he said, 18 is stock...
Evil_keeps_me_young
Registered
yup 18... 
Dozerdriver
Registered
let me know if you need sprockets for the '08
All that information and more can be found with one click here
https://www.hayabusa.org/forum/gen-ii-busa-information/100074-gen-ii-oem-parts-guide.html
https://www.hayabusa.org/forum/gen-ii-busa-information/100074-gen-ii-oem-parts-guide.html
Dozerdriver
Registered
34mm front spocket nut 08 busa
Ok...so is it a 32mm or 34mm. ???
playtimebusa
Registered
anyone find out for sure? 32 or 34?
I thought it was 32MM but cannot confirm this...
playtimebusa
Registered
just did mine last week.. it's a 36mm.. threw me for a loop when I saw it fit! (08')
ToXSicK RoCKeT
Registered
Well seemz therez some conflicting info here? 
Dozer, I use a 1-1/2 six point socket, it fits a little loose, but it works just fine....I have chaged mine twice now with it.
Dozer, I use a 1-1/2 six point socket, it fits a little loose, but it works just fine....I have chaged mine twice now with it. 
Draco1340
Registered
ToXSicK RoCKeT
Registered
Similar threads
