First gen wheels on second gen busa

[stangman327]

Will they work?

[Big E]

Nah, two totally different set of wheels.

[Blanca BusaLess]

I believe genI wheels will go on a GenII with correct spacers as they are thinner but not vice versa as the GenII wheels would have to be machined down to fit a GenI.

I started a thread a long time ago asking opposite of what you seek and in pretty sure that was the answer I got. Give the pros a lil while to wake up. Somebody will confirm or deny this.

[stangman327]

Thanks guys I'll pass the word to a friend who needs a rear wheel on his 08.

[Rollin20z]

Front wheels will need:
1.5mm spacer rotor off of wheel,
additional 3mm of spacer on each side of axle,
5mm spacer for calipers to go from 310mm to 320mm rotors.

Rear needs:
Sprocket will need to be spaced out to align chain(mine are Marchesini's so I'm not sure on stockers)
Caliper needs to be converted to Gen 1 underslung caliper set-up, or
Have new rotor made as Gen 2 rear rotor is 260mm and Gen 1 is 240mm

Not really hard to do at all, but it just takes a little using some common sense.

[stangman327]

Front wheels will need:
1.5mm spacer rotor off of wheel,
additional 3mm of spacer on each side of axle,
5mm spacer for calipers to go from 310mm to 320mm rotors.

Rear needs:
Sprocket will need to be spaced out to align chain(mine are Marchesini's so I'm not sure on stockers)
Caliper needs to be converted to Gen 1 underslung caliper set-up, or
Have new rotor made as Gen 2 rear rotor is 260mm and Gen 1 is 240mm

Not really hard to do at all, but it just takes a little using some common sense.

Okay thanks I'll pass the info to him