Fastest/quickest STOCK motor with boost?

200.gif
 
Gen2 12psi secondary injectors and a fuel pump race gas. Tuned with editer. 100% OEM no mods to the engine. It's been alive under boost for about 5 years now and before the turbo it had a 100 shot on it.
  • I did almost the same thing as you. I have a MAXX ECU RACE, increased thermal gaps of piston rings, 2mm spacer, a set of absolutely all sensors, such as EGT, AFR, knock sensors, air temperatures before and after the liquid intercooler (DIY), traction control, better brakes, forged wheels, understatement of the front and rear, turbine 3582, water methanol. all the wiring is done by me. I would like to exchange experiences. Watsapp +7 964 44 002 44 Boris. I live in Russia, Moscow. There are a lot of all kinds of parts, for the 1st and 2nd generation, a spare engine on wossnerr pistons and connecting rods of the 1st generation, microtech for the first generation, and so on. I decided to start with the drain of the motor and a pressure of 0.5 bar.


  • Google Переводчик
 
Last edited:
Back
Top