clutch problem... no bottom fairing...

[tgrant1024]

EVERY TIME I RIDE HARD.... IT STARTS TO BE DIFFICULT TO PUT MY BIKE IN FIRST GEAR OR NUTURAL... i had my clutch bled and it started riding perfect... went 160 and its not shifting right again... then i noticed i dont have the bottom fairing that goes under the bike... could that be the problem?

 

[kromdom]

I highly doubt the missing "belly wing" is the culprit. How many miles on the bike?

 

[tgrant1024]

theres 23,000

 

[dadofthree]

Belly wing is for appearance maybe aeros, but has no impact on clutch operation.

 

[sixpack577]

Have you tried adjusting the linkage rod on the shifter? That can make it easier/harder to get in 1st or neutral.

 

[Ludicrous Speed]

Or you may have a warped steel.

 

[BA BUSA]

Check the fluid level in the clutch master...you might have a leak.
Posted via Mobile Device

 

[tgrant1024]

i took my fairings off and i found a leak... checked my clutch master and close to empty so i bought a mityvac and some break fluid so i can do it myself ... i dont know where to start i have been watching vids but there all on other bikes not a busa so i dont know for sure i need some help lease:

 

[BA BUSA]

Bleeder is down on the slave cylinder...
Posted via Mobile Device