One more mod I'm doing..... I ordered a case protector for my 02 as a "just in case" kickback problem rears it's ugly head. I've read all about the thing, where it goes etc and how to do it. Just wondering if anyone has a pic showing where it goes? Thanks and yes, even though I just posted five parts filled with mods... I just can't stop!!!
Case Protector
- Thread starter Learjett
- Start date
No, this ..... Case Protector, Starter Kickback, Suzuki Hayabusa
1999-2007
Hayabusa - Case Protector
This titanium sleeve was designed to eliminate case breakage due to starter kickback from high compression motors or low battery voltage.
Installation Instructions
Remove right hand fairing
Remove Idler gear cover and gear
Remove starter clutch cover and reduction gear (this is were sleeve goes)
Install case protector with bevel inside
Use 20mm socket and tap down until flush
-Important- Case protector MUST BE FLUSH or slightly past case ear
It's a round TI sleeve. Thanks!
1999-2007
Hayabusa - Case Protector
This titanium sleeve was designed to eliminate case breakage due to starter kickback from high compression motors or low battery voltage.
Installation Instructions
Remove right hand fairing
Remove Idler gear cover and gear
Remove starter clutch cover and reduction gear (this is were sleeve goes)
Install case protector with bevel inside
Use 20mm socket and tap down until flush
-Important- Case protector MUST BE FLUSH or slightly past case ear
It's a round TI sleeve. Thanks!
chrisarrington
Registered
First I have heard of this mod. Is this something that happens alot?
COLDSTONE1298
Registered
I thought it was a problem only apparent on some of the 03's?
chrisarrington
Registered
Good. Mine is an 06
99-02 problem $30 part can save ya.
Similar threads
