busa disassembly

[hayabusa_83]

hey guys, im tearing the bus down, to paint/prep it, and running into some problems, as for the tail, i cant figure out how to take off those 4 metal "things" that u use for like a tie-down, on the rear... and if someone could please explain how to easily remove the front end.....any help would be appreciated...thanx

 

[dudewizr]

Pop the little black caps off with a knife blade and that will reveal a allen head inside. have fun.

 

[BA BUSA]

Pop the little black caps off with a knife blade and that will reveal a allen head inside.  have fun.

What he ^ said

 

[flynjay]

Only the front 2 are screwed to the frame and actually hold the rear plastics.  The back 2 are screwd into the grab rail, which is held in by 4 bolts...12mm heads I think.

Yeah, what they said about the black plastic plugs.  5mm Allen fits them.

I know I'm a bit late...should have looked at the date !!!

BTW, What part of FL are you located?



<!--EDIT|flynjay
Reason for Edit: None given...|1138080362 -->

 

[hayabusa_83]

fly,
im in the melbourne/ cocoa beach area...thanks guys.......

 

[Mandangelo]

fly,
im in the melbourne/ cocoa beach area...thanks guys.......

Melbourne here .........