Air Shifter Bottle Mounting

[sidebusa]

Any suggestions for mounting MPS Air Shifter Bottle on 05 Hayabusa??? A picture would be great if you can. Thanks Guys.

[streaker00]

I have mine mounted inside the tail section on the right side. you can use hose clamps to hold it in place. Sorry no pics at this time.

[pitman3321]

inside the frame cover/tail section with zip ties or hose clamps would work 2

[slow_and_easy]

I have mine mounted inside the tail hump with plastifoam encasing it. I'll get some pics if you need em but if you do the same, be sure to mount the pressure guage/fill end toward the rear for easier access.

[psycobusa]

here's a pic for you. it has the quick release lines so you can take it off whenever you need the room.

[Blue Streak]

I have mine mounted inside the tail section on the right side. you can use hose clamps to hold it in place. Sorry no pics at this time.

Thats where I mount them on busas.

[mrcooley]

i mounted mine inside the tail on the right side with zipties....works fine.

[DRAGBUSA1300R]

RIGHT SIDE OF TAIL LARGE ZIP TIES

[wat1000]

Org family,

I have an 08 Busa and looking for ideas on where to mount my 9 oz CO2 bottle. I really don't want to mount it outside the plastics. Any suggestions?

[BlueHaya]

This is my GEN I...not sure if the GEN II trunk is the same.

9oz paintball bottle

[RedFalco]

Same as BlueHaya. <<Thankyou for the hose clamp idea on securing the bottle to the bracket... I was going through them there plastic ties like crazy...

You can pick up the mounting bracket here: LINKY Bottle bracket

[TurboR1391]

Org family,

I have an 08 Busa and looking for ideas on where to mount my 9 oz CO2 bottle. I really don't want to mount it outside the plastics. Any suggestions?

Here's a pic of where I mounted mine Wat......it's on the rightside of the subframe.

[mrgfpowell]

i make my own bottles out of pvc.. not co2 though. and mount them on either side in rear tail with zip ties