Air Filter Replacement

[Warrior58d]

I am trying to install a K&N Air Filter and am flumuxed. I took the old filter out and the filter is like a part of the top. Is it glued in there. Do I just rip the old filter out of the top to install the new one or am I missing something here?

[†WÃ￾§†ëD]

the new filter will have a top with it, you dont rip anything apart... if it dont have a top, you have the wrong filter...

[Warrior58d]

the new filter will have a top with it, you dont rip anything apart... if it dont have a top, you have the wrong filter...

Can I just delete this topic.

Kels

[busabrother]

Nope Now we all must laugh at you 4ever!!

just kidding. We all make mistakes sometimes. (just not that one) muah hahahahahah!!

Ride on warrior!!

[hayabusa1967]

Hey guys does it change anything with a K&N computer wise...like can you just put the k&n in a stock bike with no problems

[busabrother]

need a pc3r i think

[MET]

the new filter will have a top with it, you dont rip anything apart... if it dont have a top, you have the wrong filter...

Can I just delete this topic.
 
   Kels
   

Sure but we already caught you. Don't feel bad I am sure that there are at least 100 guys that did the same thing when they had the Buda new.

[MET]

need a pc3r i think

no if you are just changing the filter the bike will adjust fine. If you are changing pipes filter then you should get the max with a PC. You will find that the bike breaths a little better with the filter but the Oxygen sensor and stock computer will take care of some of the air gain.

[pure_ego]

no doubts.. I remember seeing this exact same post three/four times..

haha

ok, i ripped the old filter off... now what kinda glue do I use to put the new one on with? .. oh wait.. was I not supposed to rip it off the plastic holder thing? [/QUOTE]

[Purplehaze]

the new filter will have a top with it, you dont rip anything apart... if it dont have a top, you have the wrong filter...

Can I just delete this topic.
 
   Kels
   

Sure but we already caught you.  Don't feel bad I am sure that there are at least 100 guys that did the same thing when they had the Buda new.

nope I just stripped one of those screws

[PACIFICBUSA]

heheh....nice. Ride on, Warrior! Better to find out here than on the street at speed.