jch364
Registered
- Joined
- Mar 19, 2006
- Messages
- 2,630
- Reaction score
- 827
ok heres the thing. the other day I took the airbox off to change the plugs. Ive done this many times before. Got 30k on the bike. The thing is the air box just wouldnt seem to go back over the stacks correctly and tighten down right. Now I know the screw at the top is off for some unknown freekin reason but i could not for the life of me get it to slide down and tighten up correctly. Finally today I was able to get the airbox over the intakes and locked down. I had to use an exacto knife and cut away at the screw hole at the top so i could get the screw in place. Nothing was in the way and the screws on both sides of the airbox were loose. took me forever to get it back this timee... anyone else had this problem and or know what the solution is to it?
