Air box mods

hayabusarob

Registered
Joined
Jun 26, 2002
Messages
10
Reaction score
0
aktion035.gif
I want to remove my flapper valve. How much do I grind out on the air box? Do I need to remap my power commander for the increased airflow?

OB_WRIST~ROCKET

Registered
Joined
Jun 11, 2000
Messages
39
Reaction score
0
For a full airbox mod you would just about remove the entire middle "layer" of the box. You would cut out all but maybe a 1/2-3/4 of a inch all the way around the inside of the box....then fill the box with black filter foam and TADAAA!! your FULL AIRBOX MOD is done.
aktion033.gif
WR

In this pic...the red area needs to be removed.

#1 is the outside of the airbox
#2 is the area to be removed
#3 is the bottom of the airbox

picture.JPG

TJFAST

Registered
Joined
Mar 31, 2002
Messages
457
Reaction score
1
Do you receive any more HP with the full mod(more than small mod) ?
aktion043.gif

busabob

Registered
Joined
Aug 7, 2002
Messages
1
Reaction score
0
First I want to say thanks to the info on the air box mod. I did it on my '99 and it definitely gave it a bit more pep. Second, in order to do the mod, I found it highly effective to use a Roto-Zip bit in a drill. It makes for a very clean cut and only takes about 3 minutes to do the whole thing. Sure beats the hell out of trying to do it with a utility knife !!!

gsxrkungen

Registered
Joined
Jun 17, 2002
Messages
14
Reaction score
0
wow.gif
does enyone know were to buy this black foam
lookaround.gif
lookaround.gif
dont wanna do the big airbox untill a have the black foam.

lookaround.gif

busabullet

Donating Member
Joined
Mar 29, 2002
Messages
618
Reaction score
0
I would like to do the airbox mod but I'm a little worried what is use, what is the black foam used for? Does the heat off of the motor have any effect on the intake charge?

Rich

Registered
Joined
Dec 15, 2002
Messages
1,670
Reaction score
2
I checked that link that was posted and it was not there anymore. Can someone post what to do for the mods?? Thanks

gsx1300r

Registered
Joined
Feb 3, 2003
Messages
16
Reaction score
0
what is the black foam used for? how much foam do I need, and where can I find it? appreciate the help

Puck

Registered
Joined
Feb 2, 2002
Messages
429
Reaction score
0
Airbox modification:







The air filters are the BMC or K&N filters for the small airbox mod or the Uni-Flo foam for the large airbox mod.

BADZXELEVEN

Registered
Joined
Jul 1, 2002
Messages
238
Reaction score
3
And if you wanna do the airbox mod yourself and buy the foam. Click the link that Puck put up.
Dennis will sell yu all you want.

NO, the heat has no effect on the foam,
It's INSIDE that airbox and doesn't get hot.
Back
Top