Corbin Seat Height for Gen 3

[Puckman77]

Hi everyone. I looked at the other threads about Corbin seats but they were all about Gen 1 and Gen 2. I have reached out to Corbin directly about what impact, if any, their seats have on the stock seat height of 31.5". I am looking for a seat that lowers by any amount since I can flat foot already but wouldn't mind something a bit lower. I have had good luck with them in the past on other bikes but this time around they say the seat is the same height as stock.
Does anyone have a Corbin for their Gen 3 that can confirm what the seat height is?

[Dustin02]

I have this one and like it a lot!

Custom Corbin Seat for Suzuki Hayabusa (22-23)

Buy Custom Corbin Seat for Suzuki Hayabusa (22-23) SKU: 762608 at the price of US$ 399 | BrocksPerformance.com

brocksperformance.com

[sixpack577]

Just an fyi
The standard Corbin, and the Corbin/Brocks drag race seat Are 2 different seats.

[Puckman77]

Dustin02, I have that one as well, but depending on how I am sitting, I feel too cramped up against the tank. I think I like the flatter surface of the stock, but would still like to be a bit lower. I have the helibars too so I figure if I get a bit lower in the seat, my lean angle will be slightly more upright without killing the looks and intent of the bike.

[Puckman77]

Just an fyi
The standard Corbin, and the Corbin/Brocks drag race seat Are 2 different seats.

Roger that! If the standard Corbin lowers me a bit, I think I would prefer that over the Brocks.

[Dustin02]

Sounds like you should just shave down the stocker some. The Corbin will either be the same or probably higher. I have a Corbin on my B-king, and I definitely sit higher on that one.

[CBXRider]

Corbin makes custom seats, at least in their Hollister shop. Just tell them what you want, hard foam, soft foam, thick foam or thin, leather or vinyl cover etc.

[Spudley]

I have found in past the Corbin Saddle is more robust, and taller than a factory saddle until it's conditioned and settles in. But it does not lower to any great extent even after seasoned conditioning.

Don't get me wrong, I'm still ordering a set of Corbin's for my bike, but I have no problem with saddle foot height. It's a comfortable and great saddle.

[kim windsor]

Hi everyone. I looked at the other threads about Corbin seats but they were all about Gen 1 and Gen 2. I have reached out to Corbin directly about what impact, if any, their seats have on the stock seat height of 31.5". I am looking for a seat that lowers by any amount since I can flat foot already but wouldn't mind something a bit lower. I have had good luck with them in the past on other bikes but this time around they say the seat is the same height as stock.
Does anyone have a Corbin for their Gen 3 that can confirm what the seat height is?

I have a 29 inch inseam I as not able to flat foot .I purchased a seat from Brock’s that is made for him by Corbin.
I now can flat foot . seat dropped almost 3 inches .

[Ked0607]

Just ordered thr brocks today. Make sure to use a discount code if you order the Brocks.

[PeregrineKeith]

Man I took a huge gamble on my Harley seat and I actually love it and it was the newest seat BadBoyz made so yeah a big chance… I’m just so worried I won’t like the Brock’s and I’ll be stuck losing money on the thing for even if I sold I’m not expecting full retail. You guys with Brock’s seats please keep us posted on your thoughts. Thanks in advance

[Ked0607]

Man I took a huge gamble on my Harley seat and I actually love it and it was the newest seat BadBoyz made so yeah a big chance… I’m just so worried I won’t like the Brock’s and I’ll be stuck losing money on the thing for even if I sold I’m not expecting full retail. You guys with Brock’s seats please keep us posted on your thoughts. Thanks in advance

im just sick of holding on for dear life in hard acceleration.

[bigoltool]

Doesn't that Brocks Drag seat mash you vitals into the Tank? No way that's working for this kid.

[Ked0607]

Doesn't that Brocks Drag seat mash you vitals into the Tank? No way that's working for this kid.

im 5'9 so tank riding is normal for me.

[CBXRider]

Doesn't that Brocks Drag seat mash you vitals into the Tank? No way that's working for this kid.

When I wheelied unintentionally right after getting my Busa I was (sorely) reminded as I landed a tad far onto the tank, that I am the male of the species.

[ottafish]

When I wheelied unintentionally right after getting my Busa I was (sorely) reminded as I landed a tad far onto the tank, that I am the male of the species.

One might say, an eye watering experience…..

[kim windsor]

I am 5feet 8.5 inches weight today 210 and going down .
ps my parts do not hurt at all ,but then again I don’t use them as much as I did when younger .

[Ked0607]

Doesn't that Brocks Drag seat mash you vitals into the Tank? No way that's working for this kid.

ok got it installed last night and its definitely different. Its not as bad or as good as I thought. I havent had time to get used to it or break it in yet. I will report back as it was a tad wet it pin it in second or third gear this morning.

[60+ Busa Rider]

May just need break it in a little. When I bought my Suzuki upgrade seat (mainly for looks) I rode for about 20 miles and took it back off and said no way, I since reinstalled it and rode a few single all day trips and now I really like the seat.

[Puckman77]

Doesn't that Brocks Drag seat mash you vitals into the Tank? No way that's working for this kid.

Yes, it does for me! The Kanji seat looks like it will have enough room in the cut carved out area to prevent being pushed into the tank but they won't sell me just the front seat.