Front stand other than Pitbull?

[Blacksmith]

Is there another stand that holds the front end up so the forks can bs removed? I just want to be able tip key the suspension sag or be able to turn the bars in the air. Just seems like a good idea but $200 for a stand when idk how soon I'll be able till ride sharing is hard to swallow

[Bumblebee]

Check Amazon, they have some other triple tree stands.

[Blacksmith]

Check Amazon, they have some other triple tree stands.

Triple tree stands ok. When I search for front stands all that comes up are fork stands I didn't know what else to call it.

[Bumblebee]

Check this out.

Amazon.com: Power Stands Racing Big Mike Triple Tree Stand - Black : Automotive

Buy Power Stands Racing Big Mike Triple Tree Stand - Black: Stands - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

[GIXERHP]

Most of them Hit the fender,,, and the front of the Nose cone, so be careful

[Blacksmith]

Most of them Hit the fender,,, and the front of the Nose cone, so be careful

Well that sucks. I mean obviously it dont matter right now but I don't want one I can't use later too

[Jbaby1969]

I can tell you which ones not to buy...The Harbor Freight ones. While the rear works good, the front is too wide and barely touches the bottom of the forks. Mine is up on a set of them now and I’m nervous as hell. I’ll be putting my front tire back on when I get off work and that will be the last time I use the front stand.

[Blacksmith]

I can tell you which ones not to buy...The Harbor Freight ones. While the rear works good, the front is too wide and barely touches the bottom of the forks. Mine is up on a set of them now and I’m nervous as hell. I’ll be putting my front tire back on when I get off work and that will be the last time I use the front stand. View attachment 1603172

No sir I won't be using harbor freight. I'm actually thinking about tnr Venom front stand their only$70 and don't look bad for less then half the price of Pitbull

[Jbaby1969]

No sir I won't be using harbor freight. I'm actually thinking about tnr Venom front stand their only$70 and don't look bad for less then half the price of Pitbull

Well I only got the harbor freights because they were local on Craigslist and I needed them ASAP. I’ll be upgrading for sure.

[Bumblebee]

I can tell you which ones not to buy...The Harbor Freight ones. While the rear works good, the front is too wide and barely touches the bottom of the forks. Mine is up on a set of them now and I’m nervous as hell. I’ll be putting my front tire back on when I get off work and that will be the last time I use the front stand. View attachment 1603172

The Venoms I got off Amazon are both adjustable for width.

I also got the paddles which go directly on the swing arm and the spool hooks included when I bought them.

I use the paddles mostly as it sits a little lower. I'll use the hooks when I take my rear tire off to get it up a little higher.

[Blacksmith]

Check this out.

Amazon.com: Power Stands Racing Big Mike Triple Tree Stand - Black : Automotive

Buy Power Stands Racing Big Mike Triple Tree Stand - Black: Stands - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

That looks good too and still less than a Pitbull

[Sandow]

No sir I won't be using harbor freight. I'm actually thinking about tnr Venom front stand their only$70 and don't look bad for less then half the price of Pitbull

I have venom stands and a venom balancer. I like it and its cheap.Does the job well!

[michael parris heuberger]

I have venom stands and a venom balancer. I like it and its cheap.Does the job well!

Hi A couple blocks of wood and a jack that is all you need.

[michael parris heuberger]

Hi A couple blocks of wood and a jack that is all you need.View attachment 1603189

View attachment 1603190

View attachment 1603191

Hi. OH and a few tie downs and a spot to tie to you do not need the lift

[Sandow]

Hi A couple blocks of wood and a jack that is all you need.View attachment 1603189

View attachment 1603190

View attachment 1603191

Is it really "safe" to lift the busa up on the pipes like in the picture?

[Blacksmith]

Michael Parris Heuberger is that a 240 on the rear or just the angle of the pic?

[CBXRider]

Is it really "safe" to lift the busa up on the pipes like in the picture?

Yeah, are you resting the weight of the bike on those headers?

[michael parris heuberger]

Michael Parris Heuberger is that a 240 on the rear or just the angle of the pic?

Hi. Yes that is a 240 on the back. That and the no name 12 over swingarm is going for sale. I have a 6 to 12 over McIntosh the rear tire will be a 200-60 or 65-17 for LSR and a 200-50-17 for drags and street.

[Blacksmith]

Hi. Yes that is a 240 on the back. That and the no name 12 over swingarm is going for sale. I have a 6 to 12 over McIntosh the rear tire will be a 200-60 or 65-17 for LSR and a 200-50-17 for drags and street.

I love the look of the 240's. That's a 12" over? It dont look that long in the pics from this angle, I want more like a 6" over

[ZeePopo]

Look up Constands. Not badly priced either