Slide pics from last night

[Blacksmith]

I'm most concerned about the clutch cover. It looks like it's just the cover that broke I dont thing the case took any damage but is there anything right there that I need to worry about? I've been wanting to work on my bike to see how everything works but this ain't how I wanted to do it

[Bumblebee]

Sucks when both sides get wrecked...at least if only one side gets it, you save a bit of repair costs.

I'd be looking for a new stator as well, I see damage on yours.

Other than the stator cover, the rest seems to be cosmetic...it won't be cheap to fix though.

[Mr Brown]

That's the stator cover you posted, replace it and if the windings are damaged replace the stator as well. If all it did was slide, and didn't smack anything it's probably still structurally sound, but if it tumbled, spun or flipped you need to check the forks, frame, wheels and swingarm are still straight.

[Blacksmith]

That's the stator cover you posted, replace it and if the windings are damaged replace the stator as well. If all it did was slide, and didn't smack anything it's probably still structurally sound, but if it tumbled, spun or flipped you need to check the forks, frame, wheels and swingarm are still straight.

From what I could tell she rolled over one time but mostly slid on the left side. That's what happened to the windshield and I may need new clip ons and weights. Bad thing is theres no bike shops in town I've called 4 shops this morning and cant even get an estimate

[Mr Brown]

From what I could tell she rolled over one time but mostly slid on the left side. That's what happened to the windshield and I may need new clip ons and weights. Bad thing is theres no bike shops in town I've called 4 shops this morning and cant even get an estimate

Where are you? I'm sure there are some members around you that can offer you some suggestions.
The stator cover damage is from sliding, post up a pic of the clutch cover when you get a chance.

[Blacksmith]

Where are you? I'm sure there are some members around you that can offer you some suggestions.
The stator cover damage is from sliding, post up a pic of the clutch cover when you get a chance.

I'm in Brunswick Ga. 60 miles from Jax Fl. I had to go to Daytona just to get the bike cause the only dealer here is Honda/Kaw or Harley. I was thinking backwards it's the stator cover that's broke the clutch is safe on the other side that didnt get as much damage I think for $160 itd be best to replace the stator anyway

[Mr Brown]

After ECU flash...Power comander or Bazzaz? DYNO's in Jacksonville ? | Engine and Performance mods

See post 4. Contact him, I'm sure he knows which shop you need to go to.

[captain]

Man you did chew it up, not just the tip over I was expecting...

[Blacksmith]

Man you did chew it up, not just the tip over I was expecting...

No sir I slid down the middle of the road a little ways. I wasn't in a hurry especially since the tire had already slipped on me once just a few minutes before but apparently these beasts slide pretty easy on all that pretty plastic fairing

[Hauie]

Honestly, at this point just part of the bike and take the check. Combine that and buy a new bike. I’m looking at 4-5k at least in damage.

[Mathewrussell52]

Ya you don’t need a estimate if you put it through insurance it’s a total loss. Your almost 4g in plastics without paying anyone to work on it. Being a 09 insurance probably value it at 6g.

[mabupa]

Honestly, at this point just part of the bike and take the check. Combine that and buy a new bike. I’m looking at 4-5k at least in damage.

Just the fairings alone will be that much, since it got both sides. Fairing stay for the nose is shot, stator and cover, exhaust, handlebars and ends, etc........! 10 year old bike with that much damage won’t be repairable to insurance, probably. Those are some sad pictures to look at. :-/

[mabupa]

Ya you don’t need a estimate if you put it through insurance it’s a total loss. Your almost 4g in plastics without paying anyone to work on it. Being a 09 insurance probably value it at 6g.

You beat me to it.

[Mr Brown]

If it were me I'd buy it back and fix it if it was a total loss.

[Blacksmith]

Damn. I'm going to do the work myself as long as theres no motor/tranny work, y'all really think the parts cost will outweigh the bike?

[Blacksmith]

If it were me I'd buy it back and fix it if it was a total loss.

That's what I'm thinking if they total it. I dont want a new abs bike and clean older ones like this are kinda hard to find around here

[Blacksmith]

Those are some sad pictures to look at. :-/

They were sadder to take bro believe me

[Jbaby1969]

Sorry to see this. I’m only an hour from you. I fish in Brunswick a couple times a month. Let me know if you need a hand with anything.

[Mr Brown]

Sorry to see this. I’m only an hour from you. I fish in Brunswick a couple times a month. Let me know if you need a hand with anything.

You're new here, but clearly you belong.

[c10]

That bent bolt in the lower engine case by the stator may have broken the engine case . A cracked engine case will total the bike most of the time . If you need a black front fender let me know . yours for shipping cost .