Where to splice in wiring

[kzz21]

I have an 05 and want to install a radar detector. Is there a place by the ignition where I can splice in without effecting anything else? Where is that extra 12v wire in the nose? (and what's the easy way to get to it)
Thanks

 

[dudewizr]

I did the same thing. There is an empty plug in the fairing. YOu have to remove it to get to the plug. I inserted the wiring right into the plug, and it is hot only with the ignition on.

 

[kzz21]

Does anyone sell the other half of that plug for a clean install?

 

[mzrsq]

Does anyone sell the other half of that plug for a clean install?

If I remeber correctly, it's the same plug as the front turn signal bulbs. So you could try to find a spare from there somehow.

 

[WuzzaCBXRider]

I did the same thing.  There is an empty plug in the fairing.  YOu have to remove it to get to the plug.  I inserted the wiring right into the plug, and it is hot only with the ignition on.

Where exactly is this plug? Has anyone used one of these for mounting the unit to?

http://www.motorcycleradar.com/products_pg3_4.htm#StemStand