What is missing here?

[dx3]

Guys,

Was looking over the bike yesterday and saw this

Seems like something is missing... If so, what are my missing?

Jonny

[twotonevert]

It looks like a mounting tab for the front fender. Either that or a reflector mount, but I thought the reflector mount was integrated into the caliper and not on a tab by itself.

[dx3]

It looks like a mounting tab for the front fender. Either that or a reflector mount, but I thought the reflector mount was integrated into the caliper and not on a tab by itself.

Well as long as it is something cosmetic then I am not too worried about it I think I may try and get this thing over to Brady for him to give it a full look over and a clean bill of health before I do any more riding.

Jonny

[twotonevert]

Is the fender mounted solid? Not broken or anything?

[dx3]

Is the fender mounted solid? Not broken or anything?

Everything seems secure - I will check again this evening when I get home.

Does anyone have a picture of their bike showing this area available?

Regards,
Jonny

[DEMMYM]

That is definatly without a dought the rear mounting bracket for your front fender.

[DEMMYM]

Does it even have a front fender on it. ???

[Rainbow7]

Do USD bikes have to have reflectors?

[twotonevert]

Here ya go bro. Your fender looks like its missing a piece.

[Commuta_Busa]

there should be a matching mounting tab on the other fork tube as well. These are both used to mount the front fender.

[twotonevert]

Your fender is broken, notice the line I drew, the jagged edge.

[skydivr]

Those brake lines are starting to look a little corroded too...

[Busa1166]

Yep broken fender. Did you lower the bike or put an air horn on it

[dx3]

Yep broken fender. Did you lower the bike or put an air horn on it

Yes it is lowered (by PO). I guess that makes sense why it was cut... Or is there a way around this when lowering?

Jonny

[Busa1166]

Lowering and 1 inch shouldn't be problem how much is it lowered ??? You think they cut it or did it break off ???

[pashnit]

Those brake lines are starting to look a little corroded too...

If you opt to upgrade....

Galfer Brake Lines, Wave Rotors & Brake Pads: Buy Now | Pashnit Moto

[pashnit]

Do USD bikes have to have reflectors?

We take them off as soon as we get home from the dealer.

[dmallord]

new fender time

[dx3]

Thanks guys. It actually looks cut and not broken, but in all honesty I am not particularly worried about it.

When I get to replacing those I will def check out the link.

Replace the fender? Doubtful my friend. Had I not spent time looking down there I wouldn't even have noticed it. At this stage, at least to me, it doesn't warrant replacement.

Regards,
Jonny

[DEMMYM]

Thanks guys. It actually looks cut and not broken, but in all honesty I am not particularly worried about it.

When I get to replacing those I will def check out the link.

Replace the fender? Doubtful my friend. Had I not spent time looking down there I wouldn't even have noticed it. At this stage, at least to me, it doesn't warrant replacement.

Regards,
Jonny

If its that hard to notice I wouldnt worry about it.